MUNTS_ |
The MUNTS_0018 type exposes the following members.
Fields| Name | Description | |
|---|---|---|
  | D1 | GPIO channel number for the on-board LED D1. Cannot be configured as an input. |
| J10A0 | Analog input channel number for Grove Analog Input Connector J10 pin A0 (MCP3204 input CH2). |
| J10A1 | Analog input channel number for Grove Analog Input Connector J10 pin A1 (MCP3204 input CH3). |
| J11A0 | Analog input channel number for Grove Analog Input Connector J11 pin A0 (MCP3204 input CH0). |
| J11A1 | Analog input channel number for Grove Analog Input Connector J11 pin A1 (MCP3204 input CH1). |
| J2PWM | PWM channel number for Servo Header J2. |
| J3PWM | PWM channel number for Servo Header J3. |
| J4D0 | GPIO channel number for Grove Digital I/O Connector J4 pin D0. |
| J4D1 | GPIO channel number for Grove Digital I/O Connector J4 pin D1. |
| J5D0 | GPIO channel number for Grove Digital I/O Connector J5 pin D0. |
| J5D1 | GPIO channel number for Grove Digital I/O Connector J5 pin D1. |
| J6D0 | GPIO channel number for Grove DC Motor Driver Connector J6 pin D0. |
| J6D1 | GPIO channel number for Grove DC Motor Driver Connector J6 pin D1. |
| J6DIR | GPIO channel number for DC Motor Driver Grove Connector J6 pin D1. |
| J6PWM | PWM channel number for DC Motor Driver Grove Connector J6 pin D0. |
| J7D0 | GPIO channel number for Grove DC Motor Driver Connector J7 pin D0. |
| J7D1 | GPIO channel number for Grove DC Motor Driver Connector J7 pin D1. |
| J7DIR | GPIO channel number for Grove DC Motor Driver Connector J7 pin D1. |
| J7PWM | PWM channel number for Grove DC Motor Driver Connector J7 pin D0. |
| J9I2C | I2C bus channel number for Grove I2C Connector J9. |
| SW1 | GPIO channel number for the on-board momentary switch SW1. Cannot be configured as an output. |
| USERLED | GPIO channel number for the remote Raspberry Pi user LED. Cannot be configured as an input. |
See Also